26
■ End of Operation
Exiting "ScanSnap Manager"
Operation
Click and hold the "ScanSnap Manager" icon on the Dock menu, and select "Quit" from
the menu.
Disconnecting the scanner
Operation
1. Close the paper chute cover to turn off the scanner.
⇒ The "ScanSnap Manager" icon changes to . The power lamp goes out.
2. Disconnect the USB cable from your computer.
3. Disconnect the AC cable from the power outlet.
HINT
"ScanSnap Manager" is necessary for operating ScanSnap.
To start "ScanSnap Manager", from the Finder, select the installed destination
of ScanSnap (generally, "Applications" - "ScanSnap") - "ScanSnap Manager".
(*Generally, there is no need to exit "ScanSnap Manager".)
HINT
The power of the scanner is controlled by turning on/off the computer or
opening/closing the paper chute cover. In general you do not have to turn on/off
the scanner when it is connected to your computer.
To Next Page
Loading...
Need help?
General