Fujitsu ScanSnap iX100 User Manual

Connecting a Mobile Device in Access Point Connect Mode
By using the ScanSnap Wireless Setup Tool Wizard, you can configure and check the connection
between the ScanSnap and a mobile device.
For details, refer to "Setting a Wireless LAN Using the ScanSnap Wireless Setup Tool" (page 57).
The following explains how to connect the ScanSnap and a mobile device when the wireless settings
have already been configured by using the ScanSnap Wireless Setup Tool Wizard.
1. Start ScanSnap Connect Application on your mobile device.
a The mobile device will automatically be connected to an available ScanSnap on the same
network.
HINT
l If more than one available ScanSnap is detected, or if ScanSnap Connect Application is set
not to connect a mobile device to a ScanSnap automatically, then tap the ScanSnap that you
want by name, in order to connect to the mobile device, under [ScanSnap] on the [Connect
to] screen. For details, refer to the Basic Operation Guide (Mobile Connection) for your
mobile device.
l A notification appears in the following cases:
- When the ScanSnap and the mobile device are connected via wireless LAN, and the
communication with ScanSnap Manager is disconnected
- When you log onto the computer which is connected to the ScanSnap with the ScanSnap
and the mobile device already connected via wireless LAN
Connecting the ScanSnap via Wireless LAN
61

Fujitsu ScanSnap iX100 Specifications

General

Color scanning	Yes
Duplex scanning	No
Maximum scan size	216 x 360 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	5 sec/page
Black/white scanning color modes	Grayscale, Monochrome
Scanner type	CDF + Sheet-fed scanner
Product color	Black
Sensor type	CIS
Built-in processor	GI
Daily duty cycle (max)	- pages
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Scanning media types supported	Business Card, Photo paper, Plain paper, Post Card(JPN)
Maximum ISO A-series paper size	A4
USB version	2.0
Standard interfaces	USB 1.1, USB 2.0, Wireless LAN
Current	0.5 A
Input voltage	5 V
Battery capacity	720 mAh
Power supply type	AC/Battery
Power consumption (standby)	0.5 W
Power consumption (typical)	4.7 W
Power consumption (PowerSave)	2.2 W
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	RoHS, ENERGY STAR
Cables included	USB
Bundled software	ScanSnap Manager 6.3\\r ScanSnap Organizer\\r CardMinder 5.2\\r ABBYY FineReader for ScanSnap 5.0\\r Scan to Microsoft SharePoint
Minimum scan size	25.4 x 25.4mm
Scan media weight	52 - 209 g/m²
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	47.5 mm
Width	273 mm
Height	36 mm
Weight	470 g