EasyManuals Logo
Home>Fujitsu>Monitor>SCENICVIEW P17-3P

Fujitsu SCENICVIEW P17-3P User Manual

Fujitsu SCENICVIEW P17-3P
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Important notes
Important notes
ImportantnotesNotes
In this chapt er you will nd information regarding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies with the re
levant safe ty regulations for data processing equipment,
including electronic ofce ma
chines for use in an ofce environment. If you have a n y
questions, contact your sales
outlet or our Help Desk.
The display surface of the devi
ce is sensitive to pressure and scratches. You should therefore
be careful with the display sur
face in order to avoid lasting damage (scratche s).
If the device is brought into the installation site from a cold environme nt, condensation
can form. Before operating the device, wait until it is absolutely dry and has reach ed
approximately the same temperature as the installation site.
When installing and operatin
g the device , please obse rve the notes on environmental
conditions in Chapter "
Tech
nical data", Page 31 as well as the instructions in Chapter
"
Setting up an ergonomic vid
eo workstation", Page 10.
To ensure sufcient ventilation, the air inlet and outlet openings of the device must be kept clear.
The device automatically set
s itself to the correct voltage within the range from 100 V to 240 V.
Make sure that the local mains
voltage is neither higher nor lower than this range.
Ensure that the po wer socket on t he device and the mains outlet are freely accessible.
The ON/OFF switch does not fu
lly disconnect the TV from the mains voltage. To disconnect
fully from the mains supply,
remove the power plug from the socket.
The device is equipped with a power cable that complies with s afety standard s.
Use the s upplied power cable o
nly.
Lay the cables in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When conn ecting the device, observe the relevant
notes in chapter "
Connecting the device", Page 16.
No data transfer cables shou
ld b e connected or disconnected during a thunde rstorm.
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the device (danger of electric shock, short circuit).
The device is not waterproof!
Never immerse the device in water an d protect
it from spray water (rain, se
a w ater).
In emergencies (e.g. damaged casing, elements or cables, penetration of
liquids or foreign m atte r), switch off the device, disconnect the power plug and
contact your sales outlet or our Help Desk.
Repairs to the de vice must o
nly be perfo rmed by qualie d technicians. Unautho rised opening
and incorrect repair may gr
eatly endanger the user (electric shock, re risk).
Only use the screen resolution settings and refresh rates specied in Chapter
"
Technical data", Page 31. Otherwise you may damage the device. If you are in
any doubt, contact your sales outlet or our He lp Desk.
A26361-K1240-Z120-7619, edition 1 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu SCENICVIEW P17-3P and is the answer not in the manual?

Fujitsu SCENICVIEW P17-3P Specifications

General IconGeneral
BrandFujitsu
ModelSCENICVIEW P17-3P
CategoryMonitor
LanguageEnglish

Related product manuals