Fujitsu Stylistic User Manual

54
CONNECTION TO THE NETWORK
This section explains connection to the network.
If there is an administrator of the network, contact
the network administrator for data settings.
Setting the network
Perform the “Setting TCP/IP” and “Confirming
the computer and work group names”
operations required for network connection.
Setting TCP/IP
1. Click the [Start] button first and then
[Control Panel].
2. If the Control Panel is in Category view,
switch to Classic view by clicking “Switch to
Classic View” under Control Panel the left
frame. (If you are already in Classic view,
“Switch to Category View” will be
displayed.)
3. Double-click [Network Connections]. A list
of currently installed networks will be
displayed.
4. Right-click [Wireless Network Connection]
in the list, and then click [Properties] in the
menu displayed. The [Wireless Network
Connection Properties] window will be
displayed.
5. Click the [General] tab if it is not already
selected.
6. Click [Internet Protocol (TCP/IP] and then
click [Properties]. The [Internet Protocol
(TCP/IP) Properties] window will be
displayed.
To change the setting of the IP address,
you need to be logged in from Windows
as an administrator.
7. Set the IP address as follows:
• For ad hoc connection: Select [Use the
following IP address:] and then enter data
for [IP address] and [Subnet mask]. See
page 64 for IP address setting.
• For access point (infrastructure)
connection: If your network uses DHCP,
select [Obtain an IP address
automatically] and [Obtain DNS server
address automatically]. If your network
uses static IP addresses, consult with
your network administrator for the correct
IP address settings.
8. Click the [OK] button. Processing will return
to the [Wireless Network Connection
Properties] window.
9. Click the [OK] button.
10. Close the [Network Connection] window.
Following this operation, confirm the names of
the computer and the workgroup as follows.
Confirming the computer and work group
names
Enter the network name (SSID), the network
key, and other data required for wireless LAN
connection.
1. Click the [Start] button, then [Control
Panel].
2. If the Control Panel is in Category view,
switch to Classic view by clicking “Switch to
Classic View” under Control Panel the left
frame. (If you are already in Classic view,
“Switch to Category View” will be
displayed.)
To modify the computer name and/or the
work group name, you need to be logged
in from Windows as an administrator.
Ocampa5 (51-64) 10/12/03, 11:41 AM54

Fujitsu Stylistic Specifications

General

Brand	Fujitsu
Model	Stylistic
Category	Tablet
Language	English