Furuno CH-500 - Page 102

APPENDIX 1 MENU TREE
├
Range Settings
│ ├
HOR. (All defaults shown below)
│ │
m: 20, 40, 60, 80, 100, 120, 160, 200, 250, 300, 400, 500, 600, 800, 1200
│ │
ft: 40, 80, 120, 200, 300, 400, 500, 600, 700, 800, 1000, 1500, 2000, 2500, 3500
│ │
fm: 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400, 500
│ │
HR: 10, 20, 40, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400, 500, 700
│ │
pb: 10, 20, 40, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400, 500, 700
│ ├
VERT (All defaults shown below)
│ │
m: 10, 20, 30, 40, 60, 80, 100, 120, 160, 200, 250, 300, 400, 500, 600
│ │
ft: 30, 60, 90, 120, 150, 200, 250, 300, 400, 500, 600, 800, 1000, 1500, 2000
│ │
fm: 10, 20, 30, 40, 50, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400
│ │
HR: 10, 20, 30, 40, 50, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400
│ │
pb: 10, 20, 30, 40, 50, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400
│ └
ES (All defaults shown below)
│
m: 10, 20, 30, 40, 60, 80, 100, 120, 160, 200, 250, 300, 400, 500, 600
│
ft: 30, 60, 90, 120, 150, 200, 250, 300, 400, 500, 600, 800, 1000, 1500, 2000
│
fm: 10, 20, 30, 40, 50, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400
│
HR: 10, 20, 30, 40, 50, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400
│
pb: 10, 20, 30, 40, 50, 60, 80, 100, 120, 140, 160, 200, 250, 300, 400
├
Train Speed Setting
│ ├
6º (Off, On )
│ ├
12º (Off, On )
│ ├
15º (Off, On )
│ ├
18º (Off, On )
│ ├
21º (Off, On )
│ └
24º (Off, On )
├
Color Settings (Opens Color Palette)
├
│
├
System Backup (No , Internal)
├
Load Backup Data (No , Load Internal Data)
├
Preset Backup (No , Internal)
├
Load Preset Data (No , Load Internal Data)
├
Draught Offset
│ ├
Draught (0.0 m to 60.0 m; default: 0.0 m )
│ └
Hull Unit Stroke (0 mm to 400 mm; default 400 mm )
├
TX Frequency Offset
│ └
FREQ. Shift (Range and default dependent on transducer)
├
Audio
│ ├
Audio FREQ. (0.90 kHz to 1.20 kHz; default: 1.00 kHz )
│ ├
Bandwidth (Wide, Std. , Narrow)
│ ├
Harmonic Pattern (1 , 2, 3)
│ └
Auto Filter (Off, On)
├
Tests (Starts diagnostic test)
├
Test Pattern (Starts LCD test)
├
NMEA Port Monitor (Starts port monitor)
├
Simulation
│ └
Simulation Mode (No , Load Internal Data)
└
Restore Initial Settings (No , Yes)
Language Settings (Japanese, English , Thai, Vietnamese, Chinese, Spanish, Indonesian,
Malay, Burmese, French, Norwegian, Italian)
(Continued from previous page)
AP-6