5. MENU OPERATIONS
5-4
5.5 System Menu
The System menu contains settings which can be adjusted according to your prefer-
ences.
A simulation mode is also included to acquaint you with the many functions of the
equipment. The simulation mode does not require a connected transducer.
How to access the System menu
1. Press the MENU key. The menu window appears.
2. Press S to select the menu bar.
3. Press W or X to select [System].
4. Press T to select [Go to SYS Menu].
5. Press W to select [Yes]. The [System] menu appears.
: Select
System Menu
System Settings
Range Settings
Train Speed Setting
Set at installation. See the
installation manual.
See Chapter 6.
Color Settings
Language Settings
System Backup
Load Backup Data
Preset Backup
Load Preset Data
Draught Offset
TX Frequency Offset
Audio
Tests
Test Pattern
NMEA Port Monitor
Simulation
Restore Initial Settings
: Change
Menu: Close
To Next Page
Loading...
Need help?
General
