5. MENU OPERATIONS
5-9
3. The cursor appears as shown in the figure above. Referring to the figure above
and the table below, press X or W to move the cursor to the setting you wish to
change. The currently selected item is also shown next to the [Color] indication at
the lower half of the window.
4. Press S or T to select [R] (red), [G] (green) or [B] (blue).
5. Press X to increase the color saturation, or press W to decrease the color satura-
tion. The current color mix appears in the palette window to the right of the RGB
settings.
6. Repeat the procedure as required.
5.10 How to Backup/Restore Settings
The system can save either a full (System Backup) or partial (Preset Backup) backup.
The full backup saves all user customizations, including [System] menu settings.
The partial backup saves only the menu settings for the [COM1], [COM2], [HOR.],
[VERT], [ES] and [FUNC Key] menus.
How to backup your settings
1. Referring to section 5.5, open the [System] menu.
2. Press T or S to select [System Backup] (full backup) or [Preset Backup] (partial
backup), then press X. A confirmation window appears. The example below
shows the full backup confirmation window. Note that the title at the top of the win-
dow changes depending on your selection.
3. Press X or W to select [No] or [Internal], as appropriate.
• [No]: Backup is stopped, no settings are saved.
• [Internal]: System settings are saved in the Transceiver Unit’s internal memory.
Note: Previous backup data will be overwritten.
[Echo] Changes the echo colors based on echo strength. The lowest
setting ([1]) is the color for the weakest echoes. The highest set-
ting ([31]) is the color for the strongest echoes.
[BKGD1], [BKGD2],
[BKGD3]
Sets the color for each preset color scheme. [BKGD] sets the
background color, [Text] sets the text color and [Menu] sets the
menu background color.
[Full A-Scope] Sets the base color for the Full-circle A-Scope display. This color
does not affect the Horizontal or Echo Sounder side-display A-
Scope.
[Color:] The item currently selected by the cursor appears here.
RGB settings Adjust the red, green and blue color saturation for the selected
item.
[Default Set] Restores the default color settings.
System Backup
Are You Sure?
Note:
Previous backup data will be overwritten.
: Change
Menu: Apply
No
Internal
To Next Page
Loading...
Need help?
General
