Furuno CH-500 User Manual

APPENDIX 1 MENU TREE
CH-500/CH-600
Main menu
├
COM1
1
├
COM2
2
├
HOR.
3
├
VERT
4
├
ES
5
├
FUNC Key
6
└
System
7
CH-500
Bold Italic : Default
1 COM1
├
TX Power (High , Low)
├
TX Pulselength (Long , Short)
├
TX Rate (EXT., 1 to 10; default: 10 )
├
Interference (Off , On)
├
AGC ( 0 , 1, 2, 3, 4, 5)
├
Auto Filter (Wide, Std. , Narrow)
├
Reverberation (Off, On)
└
Volume (0.0 to 10.0, default: 0.0 )
2 COM2
├
Delete Track (No , Yes)
├
White Marker (Off, 1 to 31; default: Off )
├
Erase Color (Off, 1 to 30; default: Off )
├
Echo Colors (32 , 16, 8)
├
BKGD. Colors (1, 2 , 3)
├
Bearing (Relative, True)
├
Heading (-180 to +179º; default: +0º )
├
Roll Offset (-10.0 to +10.0; default: +0.0º)
├
Pitch Offset (-10.0 to +10.0; default: +0.0º )
└
Sensor Correct (-180 to +179º; default: +0º)
3 HOR.
├
TVG Level (0.0 to 10.0; default: 4.0)
├
TVG Distance (0.0 to 10.0; default: 4.0 )
├
Gain ADJ. (-10 to +10; default: 0)
├
RES. Color (LOG , Linear, Square, Cube)
├
Clutter (0 , 1, 2, 3)
├
Tracking Key (Position, Echo , Reverse)
├
Tracking Mode (Auto , Manual)
├
Auto Tilt (Off , ±2º, ±4º, ±6º, ±10º)
└
A-Scope (Off , On)
4 VERT
├
TVG Level (0.0 to 10.0; default: 4.0)
├
TVG Distance (0.0 to 10.0; default: 4.0 )
├
Gain ADJ. (-10 to +10; default: 0)
├
RES. Color (LOG , Linear, Square, Cube)
├
Clutter (0 , 1, 2, 3)
└
HOR. Range (×1 , ×2)
AP-1

Furuno CH-500 Specifications

General

Brand	Furuno
Model	CH-500
Category	Sonar
Language	English