7.1 Status display
7-3
PV TEST ([F7]-7-1)
27. “*PV TEST CALL is rejected.” : When PV test is rejected by LES.
28. “*PV TEST CALL is pending.” : When PV test is pended.
29. “*TEST--RECEIVING MESSAGE” : During the reception of the message from LES.
30. “*TEST--SENDING MESSAGE” : During the transmission of the message to LES.
31. “*TEST--DISTRESS ALERT” : During the transmission of the distress message to LES.
32. “*WAITING FOR ACTIVATION” : When waiting the PV test is started.
33. “*WAITING FOR TEST RESULT” : When waiting for the result of the PV test from LES.
34. “*CLEARING” : When clearing the PV test mode.
35. “PV TEST is Completed.” : When the PV test is completed.
36. “PV TEST Failure.” : When the PV test is failed.
The display of “c” part
1. Idle : Idle. Waits for the transmission or the reception.
2. Idle (Pending) : Idle. Waits for the reception from LES.
3. Sending : During the transmission of the message.
4. Receiving : During the reception of the message.
5. Login : During the process of Login.
6. Logout : During the process of Logout.
7. Distress Alert : During the release of the distress alert.
8. Data Report : During the transmission of the data report.
9. Testing : During the PV test.
10. Test Setup : During the request of the PV test.
11. Scanning : During NCS common channel scanning.
12. EGC RECEIVER : When the mode is set to EGC receiver mode.
13. Delivery Status Req. : During the transmission of the delivery status request.
14. Forced Clearing :
During the forced clearing of the scan, the transmission and the reception.
To Next Page
Loading...
Need help?
General
