4.1 System menu (F8)
4-4
PC Mailer
Delivery To
Server;
When a mail server is installed on a LAN, received
mail is forwarded to the mail server via the LAN.
Server IP
(When Server is selected in Delivery To setting.)
FIXED (When Server is selected in Delivery To setting.);
Message is sent mail address specified in Mail
Address.
Address Mode
Auto
(When Server is selected in Delivery To setting.);
When the keyword (entered in Auto Delivery
Keyword) is found in the text of a message, the
message is sent to the address which appears after
the keyword. If the keyword is not found the mail is
delivered to “Mail Address.”
Mail Address
(When FIXED is selected in Address Mode setting.)
Mail Gateway
(See page AP4)
Mail Address Keyword
(When Auto is selected in Address Mode setting.)
Command
Window
Command for the direct access to RF CON/CPU
board.
JOB No.: FURUNOSERVICE
Password: FELCOM15
3. Editor Setup (Close the TEXT editor display.) : [F8]-3
Item Contents Description
Text Mode Telex/Ascii
Setting for TEXT input character
- Telex: Limits for the character used for ITA2 code.
- Ascii: Limits for the character used for Ascii code.
When transmitting, the text is changed to the
selected code in the Transmit message display.
Edit Mode Insert/Overwrite
Setting for the character for TEXT editing.
- Insert: Inputs the character to the cursor position.
- Overwrite: Overwrites the character at the cursor
position.
Word Wrap ON/ OFF
ON/OFF setting for Word Wrap of TEXT editing.
When Word Wrap is set to ON, the word in the end
of line is split to two parts. The latter half followed
by a hyphen is jumped to the next line.
Line No. ON/OFF ON/OFF setting for TEXT line number.
Tab Wide 2/4/8Char Tab setting for TEXT editor. Selects from 2, 4 or 8.
Column Width Max 80
Setting for the character number per a line.
When Text mode is set to Telex, the character
number is fixed to 69. When set to Ascii, the
character number is fixed to from 40 to 80.
Cursor Type Block/ Underline
Setting for the cursor type.
- Block: ! - Underline:
_
Scroll Full/Half Screen
Setting for scrolling.
- Full: The full of the display is moved up and down
by [PgUp] and [PgDn].
- Half Screen: The half of the display is moved up
and down by [PgUp] and [PgDn].