22
4. Press the [Enter] key to open the Com channel
menu.
06 73 No INFO
08 69
10 67 MANUAL
13 77
09 15 CH Busy
72 17
Com channel
NO INFO: Receiving station
sets channel.
MANUAL: Enter channel
with numeric key.
"CH BUSY" means the selected
channel is busy now.
5. Select the communication channel with [ ] [ ] key.
6. Confirm that “CH Busy” disappears.
7. Press the [Enter] key.
12: Mess. Entry
Call type:
SHIPS CALL
SHIP ID:
123456789
Com channel:
06
8. Press the [Call] key to send the call.
After transmitting a ship’s call, FM-2721 goes to the
waiting condition, and then the following message may
occur.
Rcvd message able ack: You can communicate.
Rcvd message unable ack: Receiving station cannot
communicate now. Other suggestion may be sent.
No response: Your call is deleted.
4.4 Sending DSC Call to a Coast
Station
To send a DSC call to a coast station, do the following:
1. Press the [Call] key to open the Call type menu.
Call type
COAST CALL
SHIP CALL
PSTN CALL
GROUP CALL
ALL SHIPS CALL
DISTRESS CALL
2. Confirm that the cursor is selecting COAST CALL.
3. Press the [Enter] key to open the Send message
menu.
4. Enter the Coast ID and press the [Enter] key. Coast
ID (7 digits) may be entered manually with the
numeric keys or automatically through the Addr. sel.
File. (Registration of ID required for automatic input.
See “4.10 Storing IDs”.)
Call type:
COAST CALL
Coast ID:
00
Send message
Addr. Sel.
Manual entry
Automatic entry from Addr. sel. file
01:TOKYO COAST
02:KOBE COAST
03:
To Next Page
Loading...
Need help?
General
