Furuno FM-8800 Service Manual

4.3 System Setting: User Menu
4-19
4.3.6 RTC （Russian Ver.）
To activate this function, the RTC board is necessary. RTC of date/time is used for Time
stamp in the [LOG] menu. The input sentence to be used proofreads RTC for every
second by ZDA>RMC.
If the input data stops, RTC is counted from the time of breaking off. Furthermore,
when setting RTC by manual, set date and time in [MENU] -> RTC, and press the
[ENT] key. It is changed to the setting data and counted the time. The backup time of
RTC is held one week or more.
4.3.7 PRINT OUT
This is to set up whether you want to print XMTD CALL, RCVD CALL, and DAILY
TEST result manually or automatically. The factory setting is all MANUAL. Even when
XMTD CALL and RCVD CALL are setup on MANUAL, if you open a file to be
printed out from [LOG] and press [6: PRINT] key, you can still print them out. To carry
out DAILY TEST, you have to keep the result displayed and then press [6: PRINT] key.
When AUTO (e.g. RCVD CALL) is in use and a printer is not connected “Printer PE”
error will appear.
Procedure
1. Select [MENU] -> PRINT OUT and press [ENT] key.
2. Select XMTD CALL, RCVD CALL, and DAILY TEST and choose either AUTO or
MANUAL and then press [ENT] key.
Print samples
Self-test RX Message TX Message
Note: Requirement for the printer connection
In a rule, if the storage capacity of RX message is 20 or more, it is not necessary to
connect a printer.
FM-8800S/D:
RCVD ORDINARY and RCVD DISTRESS log are a maximum of 50 respectively.
More than 50 logs are erased from old order.
* SETUP MENU *
POSITION
PRINT OUT
VOLUME
SYSTEM
AUTO
MANUAL
[ENT]
[ENT]
**** PRINT MENU ****
XMTD CALL MANUAL
RCVD CALL MANUAL
DAILY TEST MANUAL
* Daily test result *
MAY06/’05 18:34
MMSI: 432456789
TX POWER: OK
TX/RX PCB: OK
CPU PCB: OK
CH70RX PCB: OK
** Received Message **
MAY06/’05 18:34 ECC : OK
SHIP CALL
FROM : 123456789
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 12
** Transmitted Message **
MAY06/’05 18:34
SHIP ACK
TO : 123456789
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 12
N
OTE) EOS(RQ/BQ) is printed on
the last line in Russian Ver.
N
OTE) EOS(RQ/BQ) is printed on the
last line in Russian Ver.

Furuno FM-8800 Specifications

General

Brand	Furuno
Model	FM-8800
Category	Cordless Telephone
Language	English