Furuno FR-8122 User Manual

5-1
5. GPS OPERATION
If you are using the FURUNO GPS Navigator GP-320B, you may set it up from this radar.
5.1 Navigator Type
1. Press the MENU key to show the menu.
2. Choose GPS and press the ENTER key.
GPS menu
3. Choose Type and press the ENTER key.
4. Choose type of navigator connected to this radar and press the ENTER key. Note that GPS or
WAAS should be selected if this radar is interfaced with an AIS Transponder. The AIS Tran-
sponder will be inoperative if DPGS is selected.
GPS: GPS Navigator GP-320B connected
WAAS: GPS Navigator GP-320B connected
DGPS: DPGS Beacon Receiver GR-80 connected.
5. Press the MENU key to close the menu.
Brill/Color
Echo
Mark
Target Trails
Custom 1
Display
Custom 2
Custom 3
Menu
GPS
Type : WAAS
Datum : WGS-84
Datum Number : 001
WAAS : Auto
WAAS Number : 120
GPS Self Test
Satellite Monitor
Type 16 Message
Forward Offset : 0
Right Offset : 0
Cold Start
[ENTER]: Enter [CANCEL/HL OFF]: Back
[MENU]: Exit
Tuning
GPS
Target
ARP
AIS
System
GPS Buoy
GPS
WAAS
DGPS

Furuno FR-8122 Specifications

General

Brand	Furuno
Model	FR-8122
Category	Marine Radar
Language	English