4. AIS OPERATION
4-5
4.8 Displaying Targets Within a Specific Sector
You may choose to display AIS targets only within a specific sector. If the target sorting method
is selected to “Range,” the target data within the sector set here is transmitted to this radar.
1. Press the MENU key to open the menu.
2. Choose AIS and press the ENTER key.
3. Choose Sector Start and press the ENTER key.
4. Use the trackball to set the start point for the sector and press the ENTER key.
5. Choose Sector End and press the ENTER key.
6. Use the trackball to set the end point for the sector and press the ENTER key.
7. Press the MENU key to close the menu.
4.9 Number of Targets to Display
You may choose the number of AIS targets to display, from 10-100. This feature is useful when
the screen becomes cluttered with AIS targets. Targets are selected and displayed according to
sort method. (See paragraph 4.7.)
1. Press the MENU key to open the menu.
2. Choose AIS and press the ENTER key.
3. Choose Number of Targets and press the ENTER key.
4. Use the trackball to choose the number of targets to display and press the ENTER key.
Press the MENU key to close the menu.
340
°
(0
°
-359
°
)
20
°
(0
°
-359
°
)
30
(0-100)
To Next Page
Loading...
Need help?
General
