Furuno FS-75 User Manual

DSC60
B4-12
* DSC-60 daily test *
MAIN CPU
MODEM
RCVR1
RCVR2
REMOTE RT
REMOTE DP
:
:
:
:
:
:
JAN - 10 - 2000 - 15:26
6. Self test
Pressing [3/TEST/DEF] key with DSC standby screen or Radiotelephone setting screen
automatically starts the daily test, and the test results are displayed. Main CPU, MODEM,
and RX boards can be checked, and the connection between MF/HF radiotelephone and
NBDP made by Furuno can be checked by MIF commands.
Procedures
1. Press [3/TEST/DEF] key with DSC standby screen or Radiotelephone setting screen.
2. The test automatically starts. The test can not be cancelled once if started.
3. It takes 30 to 40 seconds to complete the test. Then, the distress alarm LED flashes,
and the buzzer and external speaker sounds for 2 seconds.
4. The test results are displayed.
If a printer is connected, pressing [8/PRINT/TUV] key can print out the results.
Note)
The default setting of DAILY TEST in PRINT OUT submenu of “Setup menu” is set at
“MANUAL”. Set it at “AUTO” to print out the test results automatically.
The printed date and time is the data of NMEA data (ZDA) from the navaids.
To display the present program version number, press the [1 RT] key five times
while pressing the [* FILE] key.
5. Pressing [CANCEL] key returns the screen to DSC standby screen.
* DSC-60 DAILY TEST *
MAIN CPU
MODEM
RCVR1
RCVR2
REMOTE RT
REMOTE DP
: OK VER.xx
: OK VER.xx
: OK
: OK
: OK FS-1562
: OK DP-6
MMSI
: 123456789
JAN - 10 - 2000 - 15:26
* DSC-60 dialy test *
MAIN CPU
MODEM
RCVR1
RCVR2
REMOTE RT
REMOTE DP
: OK VER.xx
: OK VER.xx
: OK
: OK
: OK FS-1562
: OK DP-6
JAN - 10 - 2000 - 15:26

Furuno FS-75 Specifications

General

Brand	Furuno
Model	FS-75
Category	Marine Equipment
Language	English