FELCOM 80
H1-16
3.4 Setting of Telephone
Change dialing format from dial to pushbutton as follows. The handset should be on the
hanger.
1. Press the [STO] key
2. Press the [#] key.
3. Press the [*] key to display “Pb”.
4. Press the [STO] key again.
3.5 Printer: PP-510 Setting (Ver 1650098100)
For Left Margin
Field modification
1. Replace ROM in PP-510 (Type: 1650098100) and change the DIP switch setting.
2. Update master system FD to version 10 (Type: 1650084010) and make execution FD.
Replacing ROM and changing DIP switch setting
1. Remove the printer cover and the ribbon cassette.
2. Slide the print head to far right-hand side.
3. Slide the DIP switch cover leftward to remove it.
4. Replace ROM.
5. Set the DIP switch #1 - #8 to OFF.
6. Line up the left-hand end of the DIP switch cover with point @ and then slide it
rightward to set.
7. Set the ribbon cassette and refasten the printer cover.
Note) Ver 1650098100 before
Set the DIP switch #4 and #5 to ON.
To Next Page
Loading...
Need help?
General
