FM-8500
E4-10
8. Input the ID number of the own ship in nine digits, check to be sure about the input
number, and press [ENT] key. (When a wrong number is input, press [CANCEL] key
and enter the correct number.)
9. Put the cursor on “RT” and press [ENT] key twice.
10. After the selection, press [CANCEL] key.
11. Put the cursor on “P”, and press [ENT] key.
12. Select “ON”, and press [ENT] key. (By pressing [ENT] key again, the input ID
number can be confirmed. If the number is incorrect, input the correct number, from
the first step.)
13. Return to the normal display by pressing [CANCEL] key several times.
The ID number to be input must be the MMSI number that is
allocated to the ship. Again, check that the input number is
correct.
Watch VHF ch70
auto
Setting Private mode ON or OFF.
System <DSC:RCVR/DMC>
V P ID DSC RT CH PO L
RT1-Mode:private <OFF>
OFF[1] ON[2]
System < RT 1-7 >
V P ID DSC RT CH PO L
Protection <OFF>
ON OFF
To Next Page
Loading...
Need help?
General
