FELCOM 81
H2-7
3. How to turn off ECM
Depending on the fax model of the receiving station, necessary is turning off ECM
(Error Correction Mode) of the fax PFX-50. The procedure is;
1. Turn on the fax while pressing and holding down [1] and [3].
2. Press [FUNCTION/NO] [8] [FUNCTION/NO] [FUNCTION/NO] [FUNCTION/NO]
and [AUTO RCV/YES] in this order.
Now the screen should show “FUNC0=00010010”
Note)
Press 00010000 in that order to change modem speed from 9600 bps to
2400 bps, 10: 9600bps, 00: 2400bps.
FUNC 0=0 0 0 1 0 0 1 0
3. Press [AUTO RCV/YES] several times until FUNC 18=00000110 appears.
4.
Press [0] [0] [0] [0] [0] [0] [1] [0] to turn off ECM.
The third digit from right is for ECM on and off.
Note)
FUNC 18=0 0 0 0 0 1 1 0
5.
Press [AUTO RCV/YES] and [RESET] in this order.
6. Turn off the unit and turn it on again.
ECM ON/OFF
0:OFF 1:ON
Line MON ON/OFF
0:OFF
1:ON
Modem speed
00: 2400bps 10: 9600bps
To Next Page
Loading...
Need help?
General
