20 Fishnder 90/140 Owner’s Manual
Appendix
Cleaning the Case
Clean the Fishnder’s outer casing (except for the screen)
using a cloth dampened with a mild detergent solution, and
then wipe it dry. Avoid chemical cleaners and solvents that
may damage plastic components.
Cleaning the Screen
The Fishnder screen should be cleaned using a soft, clean,
lint-free cloth. Water or eyeglass cleaner can be used if
needed. If these are used, apply the liquid to the cloth and
then gently wipe the screen with the moistened cloth.
WARNING: The Fishnder screen is coated with a special
anti-reective coating which is very sensitive to skin oils,
waxes, and abrasive cleaners. CLEANERS CONTAINING
AMMONIA WILL HARM THE ANTI-REFLECTIVE
COATING. It is very important to clean the screen using
an eyeglass lens cleaner which is specied as safe for anti-
reective coatings and a clean, lint-free cloth.
Storage
Do not store the Fishnder where prolonged exposure to
temperature extremes may occur (such as in the trunk of a
car), because permanent damage may result.
Water Immersion
The Fishnder is waterproof to IEC Standard 60529 IPX7.
It can withstand immersion in 1 meter of water for 30
minutes. Prolonged submersion can cause damage to the
Fishnder. After submersion, be certain to wipe and air dry
the Fishnder before reuse.
190-00582-10_0A.indd 20 12/2/2011 3:08:59 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
