EasyManuals Logo

Garmin GPSMAP 400 User Manual

Garmin GPSMAP 400
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
32 GPSMAP
®
400 Series Owner’s Manual
confIGurInG the unIt
Setting Sonar Alarms
To set a sonar alarm, from the Home screen, select Congure >
Alarms > Sonar.
Shallow Water/Deep Water—set an alarm to sound when the depth
islessthanorgreaterthanthespeciedvalue.
Water Temp—set an alarm to sound when the transducer reports
atemperaturethatis2°F(1.1°C)aboveorbelowthespecied
temperature.
Fish—set an alarm to sound when the unit detects a suspended
targetofthespeciedsymbols.
NOTE: You must have a transducer connected. If your unit does
not have a built-in sounder, then you must install a GSD 21 or
GSD 22 sounder module to receive sonar information.
Setting Weather Alarms
To set a weather alarm, from the Home screen, select Congure >
Alarms > Weather Alarms.
NOTE: You must have a subscription to XM WX Weather and
the optional GXM 31 antenna plugged into the XM port on the
back of your unit to view weather information. XM Weather is
available only on GPSMAP 430x/430sx/440x/440sx units. See
the GXM 31 Owners Manual for more information.
My Boat
Toconguresettingsforyourboat,fromtheHomescreen,select
Congure > My Boat.
Auto Guidance—set the Auto Guidance parameters for your boat:
Safe Depth
—set the minimum depth (referred to the chart
depth datum) to allow when calculating an autoguidance path.
Safe Height—set the minimum height (referred to the chart
height datum) of a bridge that your boat can safely travel
under.
Keel Offset—offset the surface reading for the depth of a keel. This
makes it possible to measure depth from the bottom of your keel
instead of from the transducers location. Enter a positive number to
offset for a keel. You can enter a negative number to compensate for
a large vessel that may draw several feet of water.
To adjust the Keel Offset:
1. From the Home screen, select  > My Boat > Keel
Offset.
2. Use the ROCKER to set the value of the keel offset.
3. Press SELECT to accept the number.
NOTE: Press MENU to cancel your changes and return to the
My Boat screen.

Table of Contents

Other manuals for Garmin GPSMAP 400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Garmin GPSMAP 400 and is the answer not in the manual?

Garmin GPSMAP 400 Specifications

General IconGeneral
BrandGarmin
ModelGPSMAP 400
CategoryGPS
LanguageEnglish

Related product manuals