GPSMAP
®
400 Series Owner’s Manual 3
GettInG Started
To switch between Day and Night mode:
1. Press and release the POWER key.
2. Select Day/Night Mode.
3. Press left or right on the ROCKER to switch between modes.
Using the Keypad
POWER/
BACKLIGHT
MENU
ROCKER
SELECT
HOME
RANGE (-/+)
MARK
POWER/BACKLIGHT—Press and hold to turn the unit on or off;
press and release to adjust the backlight and Day/Night modes.
RANGE (-/+)—Press to adjust the range of the sonar; zoom in or
out on a chart.
ROCKER—Press up, down, left, or right to move through menus,
highlight elds, and enter data.
MARK—Press to mark a waypoint.
SELECT—Press to select highlighted items and conrm on-
screen messages.
HOME—Press to return to the Home screen.
MENU—Press to access additional settings and conguration
options; press to return to the previous screen when indicated.
To Next Page
Loading...
Need help?
General