Garmin GTR 225A User Manual

190-01182-02 GTR 225/GNC 255 TSO Installation Manual
Rev. F Page D-18
NOTES
Figure D-10 GNC - King Serial DME - Remote Mount Interconnect
Sheet 2 of 2
ALL WIRES 24 AWG OR LARGER UNLESS OTHERWISE SPECIFIED.
GROUND DESIGNATIONS: SHIELD BLOCK GROUND AIRFRAME GROUND
AT GNC, CONNECT SHIELD GROUNDS TO THE CONNECTOR BACKSHELL -- THE SHIELD TERMINATION
LEADS SHOULD BE LESS THAN 3.0".
REFER TO MANUFACTURER’S DOCUMENTATION FOR COMPLETE PINOUT AND INTERCONNECT
INFORMATION. PINOUTS OF OTHER UNITS SHOWN FOR REFERENCE ONLY.
THE GNC MAY BE CONFIGURED AT INSTALLATION TO OUTPUT KING SERIAL DME TUNING DATA UNDER
THE DME CHANNEL MODE. SEE SECTION 6.4.2.4 FOR CONFIGURATION SETTINGS.
FOR SINGLE GNC INSTALLATIONS, WIRE AS SHOWN FOR GNC #1.
1
2
S
3
4
5
6

Garmin GTR 225A Specifications

General

Brand	Garmin
Model	GTR 225A
Category	Transceiver
Language	English