50 iQue
®
3000 Operating Instructions
BASIC APPLICATIONS > WORKING IN MONTH VIEW
3. For Day view, select from the following options:
• Tap Show Time Bars to display time bars showing the duration of an event and any event conflicts.
• Tap Compress Day View to display start and end times for each event, but no blank time slots at the bottom of the screen, to
minimize scrolling. Clear the option to display all time slots.
4. For Month view, select whether to display Timed, Untimed, or Daily Repeating events.
5. Tap OK.
Changing the Displayed Start and End Times
You can change the preferences used for new entries. Preferences include display starting time, display ending time, and alarm
characteristics. See “Setting Alarm Options” earlier in this chapter for more information on alarm preferences.
To change the start and end time in the Date Book:
1. In the Date Book, tap the Menu
icon.
2. Tap Options, and then tap Preferences.
3. Tap Start Time and use the scroll arrows to select a new start time for the Date Book screens. Repeat the step to set a new end time. If
the time slots you select do not fit on one screen, tap the scroll arrows to scroll up and down.
4. Tap OK.
NOTE: The Start and End Time are used by the various Date Book screens. The Day view schedules events to start and
end at these times when the All Day option is selected. The Week view displays the time span defined by the Start Time and
End Time.
To Next Page
Loading...
Need help?
General