4 nüvi 310/360/370 Owner’s Manual
basIc operatIon
Changing the Volume, Brightness, and Screen Lock
1. Press and quickly release the Power button, or on the Menu page, touch
.
2. Move the sliders to adjust the volume and brightness. To prevent accidental
screen taps, touch Lock. To unlock the screen, press the Power button.
Resetting Your nüvi
If the nüvi screen stops functioning, turn the nüvi off and on again. If this does not
help, do the following:
1. Disconnect the nüvi from external power.
2. Flip up the GPS antenna.
3. Press the Reset button.
4. Connect the nüvi to a power source. The nüvi should
automatically turn back on and operate normally.
Clearing User Information
CAUTION: This procedure deletes all information that you have entered.
1. Hold your nger on the upper-right corner of the nüvi’s screen while you turn
on the nüvi. Keep your nger pressed until the pop-up window appears.
2. Touch Yes. All factory settings are restored. Your recent selections and audio
bookmarks are also deleted.
➌
➋
To Next Page
Loading...
Need help?
General
