26 nüvi 310/360/370 Owner’s Manual
usInG bluetooth technoloGy
4. Touch Add (or Change, if you already added).
5. If adding, set your phone to Find Me/Discoverable mode, and touch OK on the
nüvi. Select your phone on the list. Enter passkey 1234 on your phone, when
prompted.
OR
If changing, select your phone and touch OK, or touch Add Device and OK.
6. If the pairing is successful, the Phone icon appears on the nüvi Menu page.
When you turn on the nüvi, it tries to pair with the last phone with which it paired.
After the initial pairing, you can set some phones to automatically attempt pairing
with a designated device when the phone is turned on.
To enable or disable the Bluetooth technology:
1. On the Menu page, touch Settings > Bluetooth.
2. Set the Bluetooth eld to Enabled to turn on the Bluetooth technology of your
nüvi. Then you must pair the nüvi with your phone to use the technology. The
Bluetooth icon appears on the Menu page if the nüvi is enabled.
To disconnect your nüvi from your phone, or to prevent a phone from
automatically pairing, touch Disabled.
Calling a Number
1. Ensure that your phone is paired with the nüvi.
2. On the Menu page, touch Phone > Dial.
3. Enter the number, and touch Dial.
4. To end the call, touch , and then touch End Call.
To Next Page
Loading...
Need help?
General
