GE NetworX NX-4 User Manual

NX-4 Control
Page 35
APPENDIX 3 EXPANDER NUMBERS FOR REPORTING EXPANDER TROUBLE
The tables below list the device numbers that will be reported for trouble conditions.
Device Device # reported
NX-4 Control Panel 0 See pages 33 - 34 for possible report codes.
NX-534E Two Way Listen-In 64
NX-540E AOperator@ 40
NX-582E AES Interface 77
NX-591E Cellemetry Interface 76
KEYPADS
Keypad 1 2 3 4 5 6 7 8
Device # 192 200 208 216 224 232 240 248
REMOTE POWER SUPPLY (NX-320E) OUTPUT MODULE (NX-508E)
Address & Dip Switch Setting Address & Dip Switch Setting
84 (All switches off) 88 (Switch 3 on) 24 (Switch 1 & 2 on) 28 (Switch 1,2,&3 on)
85 (Switch 1 on) 89 (Switch 1 & 3 on) 25 (Switch 3 on) 29 (All switches off)
86 (Switch 2 on) 90 (Switch 2 & 3 on) 26 (Switch 1 & 3 on) 30 (Switch 1 on)
87 (Switch 1 & 2 on) 91 (All switches on) 27 (Switch 2 & 3 on) 31 (Switch 2 on)
WIRELESS RECEIVER (NX-448E)
Switch Setting
Expander #
reported
All switches off 35
Switch 1 on 32
Switch 2 on 33
Switch 1 & 2 on 34
KEYPAD MAXIMUM WIRE RUN
(Note: These numbers are for one keypad at the end of the wire. When connecting more than one keypad to the end of
the wire, a higher gauge wire will be required.)
WHEN CONNECTED TO NX-4 WHEN CONNECTED TO NX-320E
Length in feet Wire Gauge Wire Gauge
250 24 22
500 20 18
1000 18 16
1500 16 14
2500 14 12

GE NetworX NX-4 Specifications

Power

operating power	16.5 VAC 25, 40, or 50 VA Transformer
auxiliary power with 25 VA transformer	12 VDC Regulated 500 mA
auxiliary power with 40 or 50 VA transformer	12 VDC Regulated 1 AMP

Operating Environment

loop resistance	300 Ohms Maximum
loop response	500mS
operating temperature	32 to 120 degrees F

Weight and Dimensions

led keypad dimensions	6.4" Wide, 4.0" High, 1.1" Deep
nx-148e lcd keypad dimensions	6.4" Wide, 5.3" High, 1.0" Deep
metal enclosure dimension	9.25" Wide, 8.25" High, 3.50" Deep