To Next Page

To Previous Page

Page

APPENDIX 2 REPORTING ZONE CODES IN SIA OR CONTACT ID

The NX-6 has the ability to report SIA level 1 transmissions to either or both phone numbers. Each report in SIA consists

of an Event Code and a Zone or User ID. The Zone ID will be the zone number that is in alarm. The event code will come

from the chart below and be programmed in the Zone Type event code.

Programmed Event Code

SIA Code Description

0 HA Holdup Alarm

1 FA Fire Alarm

2 PA Panic Alarm

3 BA Burglary Alarm

4 BA Burglary Alarm

5 BA Burglary Alarm

6 UA Untyped Alarm

7 BA Burglary Alarm

8 BA Burglary Alarm

9 UA Untyped Alarm

10 HA Holdup Alarm

11 MA Medical Alarm

12 PA Panic alarm

13 TA Tamper Alarm

14 RP Periodic Test

15 GA Gas Alarm

16 KA Heat Alarm

17 WA Water Alarm

18 QA Emergency Alarm

19 SA Sprinkler Alarm

20 ZA Freeze Alarm

The NX-6 has the ability to report Ademco Contact ID transmissions. Each report in Contact ID consists of an Event Code

and a Zone ID. The zone ID is the zone that created the alarm. The event code will come from the chart below and be

programmed in the Zone Type event code.

Programmed Event Code

Contact ID Code Description

0 122 Silent Panic

1 110 Fire Alarm

2 120 Panic Alarm

3 130 Burglary Alarm

4 131 Perimeter Alarm

5 132 Interior Alarm

6 133 24 Hour Burglary

7 134 Entry Alarm

8 135 Day/Night Alarm

9 150 Non Burglary 24 Hour

10 121 Duress Alarm

11 100 Medical Alarm

12 123 Audible Panic Alarm

13 137 Tamper Alarm

14 602 Periodic Test

15 151 Gas Detected

16 158 High Temp

17 154 Water Leakage

18 140 General Alarm

19 140 General Alarm

20 159 Low Temp

Questions and Answers:

Need help?

Do you have a question about the GE NetworX NX-6 and is the answer not in the manual?

GE NetworX NX-6 Specifications

Operating Power

operating power	16.5 VAC 25, 40, or 50 VA Transformer
auxiliary power with 25 VA transformer	12 VDC Regulated 500 mA
auxiliary power with 40 or 50 VA transformer	12 VDC Regulated 1 AMP

Loop Specifications

loop resistance for standard loop	300 Ohms Maximum
loop resistance for 2-wire smokes	30 Ohms Maximum
loop response	500mS

Operating Environment

operating temperature	32 to 120 degrees F

LED Keypad Specifications

led keypad current draw	130 mA max.
led keypad dimensions width	6.4"
led keypad dimensions height	4.0"
led keypad dimensions depth	1.1"

NX-148E LCD Keypad Specifications

nx-148e lcd keypad current draw	110 mA max.
nx-148e lcd keypad dimensions width	6.4"
nx-148e lcd keypad dimensions height	5.3"
nx-148e lcd keypad dimensions depth	1.0"

Enclosure and Shipping