Preparing for a guided procedure with Vscan Air
Vscan Air – User Manual 5-85
Direction GP092020-1EN Rev 18
Preparing for a guided procedure
with Vscan Air
A wireless probe has a limited inherent risk of a disrupted
connection due to various factors that could lead to loss of real
time imaging.
If a temporary, unexpected disruption to real time imaging is
determined to have a severely negative adverse effect on the
patient’s health outweighing the benefits of using an ergonomic
wireless probe at the point of care, it is recommended to
consider using a wired ultrasound device for the specific
procedure guidance.
When performing a guided procedure or a freehand biopsy, i.e.
without a biopsy guide, it is the user’s responsibility to use
appropriate equipment. Ensure that the needle (especially the
needle tip) is always visible in the ultrasound image during the
whole procedure.
Always use only B-mode when performing guided procedures
or a freehand biopsy.
To Next Page
Loading...
Need help?
General
