Open Flash
The ash is used to illuminate a subject in low light or for ll-
in lighting to achieve better illumination of a subject with
pronounced shadows.
1. To turn on the ash, press the ash
button.
2. Press the left button to enter the ash Functions menu.
3. Press the Left/Right button to select from the following 6
modes:
• Flash: Forced o
Flash is turned o.
• Flash: Forced Flash
The ash will re with each shot even if there is enough
available light to take the photo without ash.
• Flash: Red-Eye + Slow Synchro
Using this mode for slow synchro shots with red-eye
reduction.
• Flash: Slow Synchro
This allows for night scenery photos that include
people in the foreground. The use of a tripod is
recommended when shooting with this setting.
• Flash: Red-eye reduction
The camera emits a brief ash before the picture is
taken to reduce red-eye eects.
• Flash: Auto
Camera ash goes o automatically based on
existing light conditions.
4. Press the
button to conrm the settings and exit the
option.
To Next Page
Loading...
Need help?
General
