gefran QE1008-W SET User Manual

20
Subject to technical modications
10. OPERATION AND CONTROL
10.1. Sensor QE1008-W
LED status
Button function
06
03
01
02
05
07
04
01 Knurled nut
02 Steel spring
03 Charging socket 6VDC
04 Slot number
05 LEDs red and green (status displays)
06 Button
07 Aerial
Using the sensors in a new environment a new assignment as described
in chapter 8.7 should be done.
Normal operation:
LED green: on
LED red: o󰀨 → Receiver search
LED green: ashing
LED red: o󰀨 → Ready
(connected to receiver)
LED red: on
LED green: on or ashing
→ Rechargeable battery virtually empty
LED red: ashing
LED green: on or ashing
→ Strain gauge damaged
Special displays:
Both LEDs ash alternately
→ Sensor is in logon mode for
assignment
LED green: o󰀨
LED red: ashing → Sensor not assigned to receiver
→ reassign
Switching on QE1008-W sensor Press button for ~1 second
Switching o󰀨 QE1008-W sensor Press button for ~1 second
Logon mode for assignment
Press button for ~5 seconds until the LEDs
ash alternately
Deleting assignment
Press button for ~10 seconds until red LED
ashes

gefran QE1008-W SET Specifications

General

Brand	gefran
Model	QE1008-W SET
Category	Measuring Instruments
Language	English