6
Subject to technical modications
This product has been built according to the latest technology and certied safety regulations.
This product is intended exclusively for the dened purpose
(→ see Chapter 6) and services (→ see Chapter 7).
Any other use or usage beyond this scope is not regarded as the intended use.
Use for the intended purpose includes reading, understanding and adhering to the operation
manual.
The details given here do NOT replace the regulations of the machine manufacturer. They are a
minimum requirement for the safe use of the system.
Information for the optimum operation and service life of the product.
Non-observance can lead to malfunctions and damage to the
product or accessories.
- Basically, the general accident prevention regulations and safety-related legislations of the
elevant country/region must be observed.
- Use this product only if it is in a perfect technical condition. Use it correctly while keeping in
mind the safety aspects and hazards detailed in the operation manual. In particular, malfunc-
tions which can affect safety, must be eliminated immediately.
The manufacturer shall not be responsible for any damages that may result thereby. The user
shall bear full responsibility.
- Work to be carried out must be completed in accordance with local legislation and
implementary provisions. If instructions in this operation manual differ from the
statutory requirements, please follow the more restrictive option. If these provisions contradict
each other, please contact your sales partner or Customer Services at
Sensormate AG before starting work.
The operation manual must always be readily available with the product.
3. INTENDED USE
4. BASIC SAFETY REGULATIONS
4.1. Explanation of symbols
4.1.1. Notes
4.2. Basic safety regulations
4.3. Organisational measures