- 35 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)
IGXConguration [PressEnter]
CPUClockRatio [Auto] 2400Mhz
CPU NorthBridge Freq.
[Auto]
Core Performance Boost
(Note)
[Enabled]
CPB Ratio
(Note)
[Auto] 2400Mhz
CPUHostClockControl [Auto]
x CPU Frequency (MHz) 100
PCIeSpreadSpectrum [Disabled]
SetMemoryClock [Auto]
x Memory Clock x6.66 1333Mhz
DRAMConguration [PressEnter]
********
System Voltage Optimized
********
SystemVoltageControl [Auto]
x CPU PLL Voltage Control Auto
x DDR3 Voltage Control Auto
x DDR VTT Voltage Control Auto
x FCH Voltage Control Auto
x APU VDDP Voltage Control Auto
x CPU NB VID Control Auto
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
x CPU Voltage Control Auto
Normal CPU Vcore 1.3750V
(Note) This item is present only when you install a CPU that supports this feature.