Gigabyte GA-A55-DS3P User Manual

BIOS Setup - 44 -
2-6 Integrated Peripherals
OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
OnChip SATA Type (SATA3_0~SATA3_3 connectors)
Congures the operating mode of the SATA3_0~SATA3_3 connectors.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
OnChip SATA Port4/5 Type (SATA3_4 and eSATA connectors)
This option is congurable only when OnChip SATA Type is set to RAID or AHCI. Congures the oper-
ating mode of the SATA3_4 and eSATA connectors.
IDE Disables RAID for the SATA controller and congures the SATA controller to PATA
mode. (Default)
As SATA Type The mode depends on the OnChip SATA Type settings.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Integrated Peripherals
 OnChipSATAController  [Enabled]
 OnChipSATAType   [NativeIDE]
x OnChip SATA Port4/5 Type IDE
x OnChip SATA Port as ESP Press Enter
 OnboardLANFunction  [Enabled]
 OnboardLANBootROM  [Disabled]

 SMARTLAN    [PressEnter]
 OnboardAudioFunction  [Enabled]
 OnboardUSB3.0Controller  [Enabled]
 USBControllers    [Enabled]
 USBLegacyFunction   [Enabled]
 USBStorageFunction   [Enabled]
 OnboardSerialPort1   [3F8/IRQ4]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level


Gigabyte GA-A55-DS3P Specifications

General

Brand	Gigabyte
Model	GA-A55-DS3P
Category	Motherboard
Language	English