Gigabyte GA-MA785GT-UD3H User Manual

- 19 - Hardware Installation
1-6 Setup of the ATI Hybrid CrossFireX
™
Conguration
Combining the onboard GPU with a discrete graphics card, ATI Hybrid CrossFireX can provide signicantly
advanced display performance for AMD platform. This section give instructions on conguring an ATI Hybrid
CrossFireX system.
A. System Requirements
- Windows Vista or Windows XP
(Note 1)
operating system
- An ATI Hybrid CrossFireX-supported motherboard and correct driver
- An ATI Hybrid CrossFireX-supported graphics card
(Note 2)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install an ATI Hybrid CrossFireX-supported
graphics card on the PCI Express slot.
Step 2:
Plug the display cable into the onboard graphics port on the back panel.
C. BIOS Setup
Enter BIOS Setup to set the following items under the Advanced BIOS Features menu:
- Set Internal Graphics Mode to UMA.
(Note 3)
- Set UMA Frame Buffer Size to 256MB or 512MB.
(Note 3)
- Set Surround View to Disabled.
- Set Init Display First to OnChipVGA.
D. Conguring the Graphics Driver
After installing the motherboard driver in the operating system, go
to the ATI Catalyst
™
Control Center. Select CrossFire
™
on the
Graphics menu on the upper left corner and ensure the Enable
CrossFire
™
check box is selected.
(Note 1) For Windows XP, you must install AMD chipset driver version 8.51 or later.
(Note 2) You do not have to install the graphics card driver if the motherboard chipset driver has been in-
stalled.
(Note 3) To change the Internal Graphics Mode or UMA Frame Buffer Size setting in BIOS Setup, be sure
to disable the CrossFire function in the operating system rst.

Gigabyte GA-MA785GT-UD3H Specifications

General

Number of memory slots	4
Maximum internal memory	16 GB
Processor socket	Socket AM3
Processor manufacturer	AMD
USB 2.0 connectors	3
Power fan connector	Yes
Number of SATA connectors	6
Number of Parallel ATA connectors	1
Controller interface type	SATA
Controller 2nd interface type	IDE
eSATA ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Motherboard chipset	AMD 785G
Audio output channels	7.1 channels
Motherboard form factor	ATX
Compatible operating systems	Windows Vista/ XP
RAID levels	0, 1, 1+0, JBOD
LAN controller	Realtek RTL8111C
Networking features	Gigabit Ethernet

Weight and Dimensions

Depth	229 mm
Width	305 mm