Gigabyte GA-MA78LMT-S2 User Manual

- 45 - BIOS Setup
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
 EnablesordisablestheSurroundViewfunction.ThisoptioniscongurableonlyifInit Display First is
set to PEG and an ATI graphics card is installed. (Default: Disabled)
Onboard VGA output connect
j
 SpeciesthegraphicsdisplayoftheonboardVGAoutputfromtheD-SUB/DVI-DorD-SUB/HDMI.
D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display. (Default)
D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display.
VGA Core Clock control
Enables or disables the control of VGA Core clock. (Default: Disabled)
VGA Core Clock(MHz)
Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz.
Thisitemiscongurableonlyifthe VGA Core Clock control option is enabled.
AMD C1E Support
(Note)
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the CPU
core frequency and voltage will be reduced during system halt state to decrease power consumption.
(Default: Disabled)
Virtualization
Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
Patch AMD TLB Erratum
(Note)
Enables or disables the Patch AMD TLB Erratum function. (Default: Enabled)
AMD K8 Cool&Quiet control
Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
reduce heat output from your computer and its power consumption. (Default)
Disabled Disables this function.
Hard Disk Boot Priority
 Speciesthesequenceofloadingtheoperatingsystemfromtheinstalledharddrives.Usetheupor
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>)tomoveitupordownonthelist.Press<Esc>toexitthismenuwhennished.
First/Second/Third Boot Device
 Speciesthebootorderfromtheavailabledevices.Usetheupordownarrowkeytoselectadevice
and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD, Legacy LAN, Disabled.
(Note) This item appears only if you install a CPU that supports this feature.
j
Only for GA-MA78LMT-S2H

Gigabyte GA-MA78LMT-S2 Specifications

General

Brand	Gigabyte
Model	GA-MA78LMT-S2
Category	Motherboard
Language	English