Graco Standard Series User Manual

Setup
16 334606B
Setup
Change Gas Engine or
Electric Motor
1 Turn motor OFF and unplug or turn
engine switch OFF. Loosen belt guard
knob and motor clamp. Perform
Pressure Relief Procedure, page 15.
2 Lift belt guard. Remove belt. Tilt
engine/motor and remove
engine/motor.
3 Tilt engine/motor. Install engine/motor.
Install belt. Lower belt guard.
4 Swivel motor clamp. Tighten motor
clamp and belt guard knob.
WLE
ti18812a
ti7529a
OI
I
O
ti25161a
OFF
ON
ti18193a
ti5387a
ti5389a
ti5382a
ti5384a
ti18192a

Graco Standard Series Specifications

General

Brand	Graco
Model	Standard Series
Category	Paint Sprayer
Language	English