GMV5 Home DC Inverter Multi VRF Units
101
4.4.9 Setting of Rapid Water Heating
Rapid water heating: Under the condition allowed by outdoor unit, start compressor and
electric heating to heat up water rapidly.
Setting of rapid water heating: Under water heating mode, press ―FUNCTION‖ button to
switch to rapid function. Icon of rapid function blinks. Press ―ENTER/CANCEL‖ to enable the rapid
function.
Cancellation of rapid water heating: Under water heating mode, press ―FUNCTION‖ button to
switch to rapid function. Press ―ENTER/CANCEL‖ to cancel the rapid function.
Note:
â‘ Rapid function is valid only once. When the hydro box reaches the condition of keeping
temperature, rapid function is cancelled to save energy.
â‘¡After water heating is off, rapid water heating function is canceled.
4.4.10 Setting of Water Heating Timer On/Off
Whether water heating is on or off, water heating timer on or off can be set.
Setting of water heating timer:
Press ―TIMER‖ to enter the setting of timer. Icon ―ON‖ will blink.
Press ―▲‖ or ―▼‖ to adjust the timing for water heating to be turned on. Press
―ENTER/CANCEL‖ to complete the setting.
Pressing ―TIMER‖ button before pressing ―ENTER/CANCEL‖ button can save the setting of
timer on and switch to the setting of timer off. Icon ―OFF‖ will blink.
Press ―▲‖ or ―▼‖ to adjust the timing for water heating to be turned off. Press
―ENTER/CANCEL‖ button or ―TIMER‖ button to complete the setting.
Pressing ―▲‖ or ―▼‖ each time will increase or decrease the time by 1 minute. However,
holding ―▲‖ or ―▼‖ for 5 seconds will increase or decrease the time by 10 minutes.
Cancellation of water heating timer:
Press ―TIMER‖ to enter the setting of timer. Pressing ―TIMER‖ button can switch between
timer on and timer off. Press ―ENTER/CANCEL‖ to cancel water heating timer.
Setting of water heating timer is as below:
To Next Page
Loading...
Need help?
General