GMV5 Home DC Inverter Multi VRF Units
368
click ―OK‖ to restart debugging on step No.10. If the error in step No.10 is U6 error (Warning
against valve error), you can click ―Skip‖. In other cases, ―Skip‖ button is null.
Step 11, 13 and 14 are reserved steps. And step 13, 14, 15 and 16 are steps in parallel (only
one of the four will be selected according to actual needs). In the end, when the step ―Project
Debug Completion‖ shows green, debugging is completed.
To Next Page
Loading...
Need help?
General