Wired Controller XK46
24
Clock setting: long press TIMER button for 5s to enter clock setting and
“ ”
icon is blinking. Pressing “ ” or “ ” button increases or decreases clock time by 1min;
holding “ ” or “ ” button for 5s increases or decreases clock time by 10min; Press
ENTER/CANCEL button or TIMER button to save the setting and then exit setting.
3.5.3 Clock Timer
Unit On/Off at a certain time can be set through clock timer.
Set Timer:
(1) Press TIMER button to enter timer on setting and the “ON” icon is blinking;
(2) Press “ ” or “ ” button to adjust unit On time. Press ENTER/CANCEL button
to finish setting;
(3) Before pressing ENTER/CANCEL button, pressing TIMER button can save unit
On time and then switch to unit Off time setting with “OFF” icon blinking;
(4) Press “ ” or “ ” button to adjust unit Off time. Press ENTER/CANCEL button
to finish setting;
Cancel Timer:
Press TIMER button to enter timer setting; press TIMER button again to switch to
the setting of unit ON time or unit Off time; press ENTER/CANCEL button to cancel
timer.
Pressing “ ” or “ ” button increases or decreases timer time by 1min; holding “ ”
or “ ” button for 5s increases or decreases timer time by 10min.
Clock Timer setting is as shown in fig. 4.4:
Unit is on and timer is not set Press TIMER button to set unit On time
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
Need help?
General
