Wired Controller XK46
28
curve to provide comfortable sleep environment.
Turn on/off Sleep Function: in unit On status, press SLEEP button to
activate.
or
cancel Sleep function.
When Sleep function is activated, “ ” icon is bright and quiet or auto quiet mode
is also activated.
When Sleep function is closed, if quiet function is activated before starting Sleep
function, only sleep function is closed while quiet function is still activated;
Under Auto, Fan or Floor Heating mode, this Sleep function is not available.
3.9 AIR SETTING*
Air Function: Adjust the amount of indoor fresh air to improve air quality and keep
indoor air fresh.
Turn on Air Function: When unit is on or off, press FUNCTION button and select
Air. “ ” icon will blink and the unit enters into Air setting. Temperature zone shows
the level of Air setting, which can be adjusted by pressing “ ” or “ ” button. The
adjustment range is 1~10. Press ENTER/CANCEL button to turn on Air function.
Turn off Air Function: When Air function is on, press FUNCTION button to select
Air, then press ENTER/CANCEL button to cancel this setting.
Fig.4.6 Shows how to turn on Air function:
Press FUNCTION button and select Air Press “ ” or “ ” button to adjust the level of
Air setting
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Need help?
General
