Wired Controller XK46
34
When the remote monitor or central controller activates Remote Shield on the
wired controller, “ ” icon will show. If user wants to control through the wired
controller, “ ” icon will blink to remind that these controls are disabled.
3.16 CHILD LOCK FUNCTION
When unit is turned on normally or turned off, pressing “ ” and “ ” button
together for 5 seconds will turn on Child Lock function. “ ” will show on the display.
Pressing “ ” and “ ” together again for 5 seconds to turn off this function.
All the other buttons will be disabled when Child Lock function is on.
3.17 GATE-CONTROL FUNCTION
When there is Gate-control System, user can insert a card to turn on the unit or pull
off a card to turn off the unit. When the card is re-inserted, the unit will recover the
operation as state in memory. When the card is pulled off (or improperly inserted),
“ ” icon will show, neither remote control nor operation of wired controller will be
effective and icon “ ” will be flickering.
Note: This model cannot be connected with gate control system on its own
because it cannot detect gate control signal directly. To realize gate control display and
gate control function, it has to be used with wired controller that includes gate control
signal detecting function (used as master and salve wired controller).
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
Need help?
General
