Grundfos CU 362 User Manual

10. Factory settings
This section gives an overview of the factory settings for the
individual units and functions in the Dedicated Controls system.
Users can thus use this overview to reconfigure the system using
the factory settings. Users can also note their own settings in the
overview.
10.1 Pump
Description Factory settings Own settings
Pump 1
Installed
In operation
Contactor feedback
IO 11x not installed
MP 204 not installed
CUE/VFD not installed
Pump 2
Installed
In operation
Contactor feedback
IO 11x not installed
MP 204 not installed
CUE/VFD not installed
Pump 3
Installed
In operation
Contactor feedback
IO 11x not installed
MP 204 not installed
CUE/VFD not installed
Pump 4
Installed
In operation
Contactor feedback
IO 111 not installed
MP 204 not installed
CUE/VFD not installed
Pump 5
Installed
In operation
Contactor feedback
IO 11x not installed
MP 204 not installed
CUE/VFD not installed
Pump 6
Installed
In operation
Contactor feedback
IO 11x not installed
MP 204 not installed
CUE/VFD not installed
10.2 Pit
Description Factory settings Own settings
Pit depth 5.0 m
Upper measurement level 1.5 m
Lower measurement level 0.5 m
Volume (upper ↔ lower)
0.1 m
3
Max. measurement time 3600 s
Max. start-up delay 2 s
Start → start delay 2 s
Stop ← stop delay 2 s
68
English (GB)

Grundfos CU 362 Specifications

General

Brand	Grundfos
Model	CU 362
Category	Control Unit
Language	English