12
Arrange Initial set-up
1 Switch the television to standby with the power switch
»ON • OFF«.
2 Switch on the television from standby with »
8«, »1…0«,
»P+« or »P–«.
– Basic Setup« menu appears when the dvice is switched
on for the first time.
Basic Setup
Menu Language
Network Settings
Select
OK
Hallo, my name is Grundig
Inter@ctive TV. In which
language we would
communicate?
Please select your desired menu language
Česky
Français
Polski
Suomi
Deutsch
Italiano
Pyccкий
Бългaрски
Espanol
Nederlands
Slovenščina
Lietuviᶙ
Dansk
Hrvatski
Português
Svenska
English
Magyar
Româneşte
Slovenčina
Eλληvıκά
Norsk
Eesti
Türkçe
Help:
7
If the »Basic Setup« menu does not appear on the
screen, make the setting by following the instructions on
returning the television to its factory settings (see “Detailed
Manual”).
3 Select the menu language with »
<
«, »
>
«, »
V
« or »
Λ
«
and press »OK« to confirm.
– »Welcome« menu appears.
4 Step-by-step installation will be made to be able to use
the television. Press »OK« to start the installation.
5 Select the country in which the television set is operated
with »
<
«, »
>
«, »
V
« or »
Λ
« and press »OK« to confirm.
– »User Mode« menu appears, the option »Home
Mode« is selected.
6 Confirm the option »Home Mode« with »OK«;
or
select the option »Enhanced« with »
<
« or »
>
« and press
»OK« to confirm.
– »Home Mode« contains preconfigured TV settings that
provide energy savings conforming EUP.
– »Enhanced« – if you will use the television for a demo
presentation, increased image and volume settings are
used in this mode. Increased mode consumes more
energy.
7 Press »OK« to confirm »Next«.
– »Network Settings« is displayed.
Notes:
7
If you want to connect your television to the home network,
– continue at point 8 for an automatic LAN connection, or
– continue at point 13 for an automatic WLAN
connection.
7
If connecting to a home network is not necessary, skip
the setting using »
« (blue). Continue settings at point.
22, 26 or 31.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Connecting to a home network with a LAN
cable
8 Press »
V
«, the line »Change Connection Type« is
selected and press »OK« to confirm.
9 Select the option »Wired« with »
<
« or »
>
« and press
»OK« to confirm.
Note:
7
The settings for a manual LAN connection are on
“Detailed Manual”.
10 Press »
« (red) to select »Connect« option to establish
modem connection.
– »Connecting ... Please wait« message will be
displayed, and if the connection is established
»Connection To Gateway: Success« messages will be
displayed.
11 Press »
« (green) to check the performed settings and
also if the local network and internet connection has
been established.
– »Testing ... Please wait« message will be displayed,
and if the connection is established »Connection To
Gateway: Success«, »Internet Connection: Success«
messages will be displayed.
12 To switch to »Source Setup« menu press »
« (blue).
Note:
7
Continue searching for TV channels with:
– point 22 for DVB-S reception;
– point 26 for DVB-C reception;
– point 31 for DVB-T reception.
Connecting automatically by entering the
network password
13 Press »
V
«, the line »Change Connection Type« is
selected and press »OK« to confirm.
14 Select the option »Wireless« with »
<
« or »
>
« and press
»OK« to confirm.
15 Confirm the message »Do you want to turn on Wi-Fi?«
with »
« (green).
16 Select the line »Select Access Point« with »
V
« or »
Λ
«
and press »OK« to confirm.
– »Select Access Point« menu appears and available
wireless networks are scanned and displayed in the
menu.
17 Select the network that you want to connect with »
V
«,
»
Λ
«, »
<
« or »
>
« and press »OK« to confirm.
– Wireless connection password screen is displayed.
18 Select the required character with »
V
«, »
Λ
«, »
<
« or
»
>
« and move to the next character with »OK«.
– Using »Shift«
,
»OK«, you can switch between
uppercase letters / numbers and lowercase letters /
special characters.
– Select »
« to delete the character entered and press
»OK« to confirm.
To Next Page
Loading...
Need help?
General