ENGLISH
6
CONNECTION/PREPARATION
----------------------------------------------------------------
Connecting the antenna (socket A)
1 To receive digital satellite channels (DVB-S), connect
the satellite antenna cable to the antenna socket
»SATELLITE« on the television set;
and / or
2a To receive terrestrial digital broadcasters (DVB-T) connect
the cable for the rooftop or indoor antenna (passive or
active indoor antenna with its own power supply) to the
antenna socket »ANT IN« on the television set;
or
2b To receive digital cable channels (DVB-C) connect the
cable for the rooftop antenna to the antenna socket
»ANT IN« on the television set;
or
2c To receive analogue TV channels, connect the cable for
the rooftop antenna to the antenna socket »ANT IN« on
the television set.
Note:
7
When connecting an indoor antenna you may have to try
it out at different positions until you get the best reception.
Connecting external data media
(socket B)
1 Plug the external hard disk to the »USB 3.0« USB
interface of the television;
or
plug the memory stick in one of the »USB« sockets of the
television.
Notes:
7
Both sockets »USB« of the television supports 500 mA
current according to the USB standard. Devices such as
external hard disk and etc. that consume more power can
only be connected to the »USB 3.0« USB interface of
the television.
7
External data media may not be disconnected from
the television while files on the data medium are being
accessed.
7
You can also connect a USB keyboard with mouse to the
sockets »USB«.
To Next Page
Loading...
Need help?
General