16
Starting A Cycle Wash
1. Insert the plug into the socket. Make sure that the water supply is turned on to full
pressure.
2. Touch the Power button for 3 seconds to turn on the dishwasher.
3. Choose a program, the response light will turn on.
4. Touch the Start/Pause button, the display ":" blinks. The program starts running.
Washing Fruits Or Vegetables
1. After turning on the dishwasher, touch the Fruit & Vegetable button
2. Touch the Water level selector button and Strength selector button to set the appropriate
water level washing intensity.
3. Touch the Start/pause button, the display “:” blinks. The program starts running.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent
may have already been released and the dishwasher may have already drained the wash water. If
this is the case, the dishwasher needs to be reset and the detergent must be refilled. To reset the
dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press any Program button for more than 3 seconds, the dishwasher will enter standby
mode.
3. Select the desired program.
4. Press the Start/Pause button.
To Next Page
Loading...
Need help?
General
