27
1. Install the drainer and tighten the captive screws with a slotted screwdriver. Note that the
seal can not be leaked; Rotate the T-tube cover clockwise, rotate it to the top of the buckle and
screw it.
2. Note that the sealing ring should not be leaked. If there is water leakage, it can be sealed
with glass glue.
3. Connect the transfer tube, T-tube, deodorant tube, and drain tube in order. Pay attention
to the nut joint, dense. The seal ring should not be leaked to prevent leakage when draining
water.
Connecting drain
Connect all outlets to the equipped T-tube and secure with clamps. Prevent water pipes from
falling off Or leaking water.
To Next Page
Loading...
Need help?
General
