Häfele 539.30.530 User Manual

9
Adjusting salt consumption
Please follow the steps below for adjustment in salt consumption.
1. Switch on the appliance.
2. Within 60 seconds after step 1, touch the Start/Pause button for more than 5 seconds to
start the water softener set model within 60seconds after the appliance was switched on.
3. Touch the Start/Pause button to select the proper set according to your local environment,
the sets will change in the following sequence: H1->H2->H3->H4->H5->H6.
4. Without any operation in five seconds, the machine will exit from set mode. The water
softener level is memorized by the program.
WATER HARDNESS
Water softener level
Salt consumption
(gram/cycle)
German
"dH
French "
fH
British
“Clarke
Mmol/l
0 - 5
0 - 9
0 - 6
0 - 0.94
H1
0
6 - 11
10 - 20
7 - 14
1.0 - 2.0
H2
9
12 - 17
21 - 30
15 - 21
2.1 - 3.0
H3
12
18 - 22
31 - 40
22 - 28
3.1 - 4.0
H4
20
23 - 34
41 - 60
29 - 42
4.1 - 6.0
H5
30
35 - 55
61 - 98
43 - 69
6.1 - 9.8
H6
60
1°H=1.25 °Clarke=1.78 °fH=0.178mmol/l
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.

Häfele 539.30.530 Specifications

General

Brand	Häfele
Model	539.30.530
Category	Dishwasher
Language	English