Add the first admin
Add User & Admin
The "#" key is the Confirm Key or the Menu Function Key.
The "*" key is the Clear Key or Back Key.
In the initial state, touch the screen, press "*" and then press "#" buttons, or directly
press the "Set" button on the back panel , then add master information.
1. During the adding process, you can not add
information that already exists.
Password:6 to 12 digits
2. The administrator user is recommended to set at least one group of fingerprint/password/card,
and be sure to remember the administrator user information.
Light up the keypad
press “*” -> press "#"
Or press the “Set” key
Voice broadcast:
“Please add administrator
information”, administrators
can be fingerprints, passwords,
or cards.
After successful addition, voice
broadcast: "administrator added
successfully"
Note: Before adding the administrator information, you can use the initialized password (123456)
to open the door. After adding the admin information, the initial password will be automatically invalid.
Total 9 admins can be added.
Touch screen -> press “*” -> press "#"
Or press “Set” on the back panel
Voice broadcast: "Please verify
administrator information”
After successful verification,
voice broadcast
1. add users
2. delete users
3. door lock settings
4. add administrator
Press 1 to enter the screen of adding
users.Voice broadcast: "Please enter
the unlocking information" (the system
will automatically add users in
sequence) The users are general users
Press 4 to add Administrators Voice
broadcast: "Please enter the unlocking
information" (the system will automatically
add users in sequence) The users are
administrators users.
Add user
Add admin
Lock Settings
11