Page EN-22 The oven
Start the cooking process
The following description applies to all func-
tions/heating modes except for and .
See below.
c
88:88
888
(17) (15)(20)
1. Selecting a function:
Turn the dial (20) until the display (17)
shows the corresponding symbol and its
standard temperature.
2. To confirm the function selection and start
cooking, tap the sensor (15).
The display shows the maximum cooking
time of 9:00 hours, the standard temper-
ature flashes to indicate that the oven is
still heating up. For functions with circu-
lating air or hot air, you will also see a ro-
tating fan symbol. The oven lighting is on.
You will hear a soft sound coming from
the external cooling fan.
c
88:88
888
(17) (15)(20)
3. Changing the cooking time:
Turn the dial (20) until the display (17)
shows the desired cooking time (0:01 to
9:00).
4. To confirm the displayed cooking time, tap
the sensor (15).
The display shows the maximum cooking
time of 9:00 hours and the standard tem-
perature flashes.
c
88:88
888
(17) (15) (14)
5. Adjusting the temperature:
Turn the controller (14) until the dis-
play (17) shows the desired temperature.
6. To confirm the displayed temperature, tap
the sensor (15).
Once the preset cooking duration has
elapsed, you will hear five signal tones and
the oven will switch off automatically.
Interrupting/ending the
cooking process
To interrupt the cooking process
– tap the
sensor (16)once.
The remaining cooking time and the cur-
rent temperature will flash in the display.
To continue cooking, tap the sen-
sor (15).
– To stop cooking, tap the
sensor (16)
twice.
‘Cooking compartment light’
function
Unlike most other programmes, you cannot
set a cooking time or temperature here.
c
88:88
888
(17) (15)(20)
1. Selecting a function:
Turn the dial (20) until the display (17)
shows the symbol.
To Next Page
Loading...
Need help?
General
