4 - System setup
4.15
Conflicts can be resolved by:
• Rename Import
• Rename Existing
• Merge
Product Mixes and Configurations can not be
merged. The Merge button will be grayed out and
not selectable for these items.
Once all conflicts have been resolved.
Press .
Home Screen
Most of the functionality of the display is not
available until the basic setup process is
completed.
A. Status bar.
B. Setup button.
C. Task bar.
You must complete these initial configuration
steps for the Run Time Environment to be active:
ATTENTION! It is strongly recommended to
set up the controller by using the “Quick
Setup Guide” on page 4.16.
• Grower, Farm, and Field management.
For more information, See “Management
button” on page 4.51.
• Equipment Operating Configuration.
You can access Configuration Setup by pressing the Setup (wrench) button (B) at the upper right-hand portion of the
Home screen. For more information, see “Configuration button” on page 4.49.
• Product setup.
For more information, see “Product tab” on page 4.50, as well as the additional configuration information described
in each Operations chapter.
• Start Field Operation.
For more information, “Configuration Setup Screen” on page 5.1.
Rename
Imported
Rename
Existing
Merge
Conflict Resolution
Item to Import Existing Item
Name:
Modification Time:
Creation Time:
Corn Name:
Modification Time:
Creation Time:
Corn
Rename the item being imported.
Rename the existing Item.
Merge the imported and existing items together.
Select Event
Guidance
To Next Page
Loading...
Need help?
General
